We have a wireless network using Cisco Aironet APs. We also have an ACS. We wish to connect this wireless to the ACS such that users who wish to connect to the wireless network must first be authenticated (via EAP or so) by the ACS before they can get an ip address and connect to the network. I'll be glad if i can get any materials to guide me on how to implement this. Thanks in advance.
However, we only have Autonomous APs and no Wireless LAN Controller. I need to configure the AP to reject connection from wireless clients until the client has authenticated with the ACS. Thanks again.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...