Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Sending traps about rouge AP to syslog server

Hi

 

I am looking to have a syslog server capture traps from a 5508 running 7.6.110

I don't want to turn logging to max just capture similar trap as one below into a syslog server

 

Rogue AP: aa:aa:aa:aa:aa:aa detected on Base Radio MAC: bb:bb:bb:bb:bb:bb 
Interface no: 0(802.11n(2.4 GHz)) Channel: 13 RSSI: -93 SNR: 0 
Classification: unclassified, State: Alert, RuleClassified : N, 
Severity Score: 0, RuleName: N.A. ,Classified AP MAC: 00:00:00:00:00:00 ,
Classified RSSI: 0

 

have adjusted the syslog level and facility but believe i have not hit the correct balance

 

any assistance would be appreciated

 

 

 

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions

Hi.SNMP traps are sent to a

Hi.

SNMP traps are sent to a SNMP trap collector. not to a syslog server.

syslog messages are sent to a syslog server.

 

I think that message above is under the level "errors" (not pretty sure). if you config the level to be "errors" you'll receive all syslog messages under that category.

Regarding SNMP traps, make sure that under the trap control that the rogue AP traps are checked so they are sent to the SNMP collector.

 

Regards,

 

Amjad

Rating useful replies is more useful than saying "Thank you"
1 REPLY

Hi.SNMP traps are sent to a

Hi.

SNMP traps are sent to a SNMP trap collector. not to a syslog server.

syslog messages are sent to a syslog server.

 

I think that message above is under the level "errors" (not pretty sure). if you config the level to be "errors" you'll receive all syslog messages under that category.

Regarding SNMP traps, make sure that under the trap control that the rogue AP traps are checked so they are sent to the SNMP collector.

 

Regards,

 

Amjad

Rating useful replies is more useful than saying "Thank you"
219
Views
0
Helpful
1
Replies
CreatePlease login to create content