I was wondering if anyone had some ideas for configuring additional security on a 7200 synchronous serial interface other than access-lists when dialing in with a modem. I would like to know if its possible to be asked for a username and password before being allowed to go through the router and seeing the Windows Logon. There is no soho router between the host and the 7200 router, and there is no access to an AAA/Kerberos/Tacacs server for authentication that way. Any ideas?
You cannot connect a sync interface to an async modem. But if you a sync/async interface then you can configure using the command aaa authentication login with a keyword of Local, you can configure a local database of username and password for authentication.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...