Setting up Radius server on Autonomous1200 series AP
We have two Autonomous AP's (1220B) that we want to communicate with our RADIUS server using Open Authentication with EAP. When this is set to Open Authentication without additions, I can connect to the network, however when it is set to use EAP, and try to reconnect to the network, an error message is displayed saying "Failed to authenticate." The IP Address of the RADIUS server and the shared secret are the same. Can anybody explain why this is please?
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...