Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

simultaneous usage of both external & internal DHCP servers on one controller

Hello,

I have a WLC controller configured to use external DHCP server. Is it possible to use an internal DHCP server for another pool (external network) on a different physical interface, dynamic interface etc?

Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: simultaneous usage of both external & internal DHCP servers

create a SVI on the switch and configure the corresponding internal pool on the WLC.. this will do it.... make sure we are mapping the WLANs correctly..

Regards

Surendra

5 REPLIES
Cisco Employee

Re: simultaneous usage of both external & internal DHCP servers

create a SVI on the switch and configure the corresponding internal pool on the WLC.. this will do it.... make sure we are mapping the WLANs correctly..

Regards

Surendra

New Member

Re: simultaneous usage of both external & internal DHCP servers

yup, have already done this...

everything is working fine.

Thanks for reply.

Re: simultaneous usage of both external & internal DHCP servers

if you want to use an external server: fill in the external DHCP IP in at the corresponding interface

if you want to use an internal server: fill in the management IP of the WLC

;-)

New Member

Re: simultaneous usage of both external & internal DHCP servers

the thing was about using them both at the same time )

have already cleared that out. thanks.

Re: simultaneous usage of both external & internal DHCP servers

Just as a follow up. Here is the Cisco document for "DHCP with the WLC"

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080af5d13.shtml#DHCP-Proxy

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
314
Views
0
Helpful
5
Replies
CreatePlease to create content