I downloaded and try wildpackets but when i use the drivers for card which i must download from wildpackets web, the blue screen is on my windows2k. I tried it on XP and the blue screen was there too.:-(
With default driver from cisco, the wildpackets sniffer can't work..
Don't know what to tell you, it's working great for us on both 2k and xp. You might want to get in touch with wildpackets support. We had no trouble with either of the above at anytime. We've had it about 6 months. We've been successful on a Dell Latitude, and 600e, T23 and T30 IBM's. Normal LEAP and wireless connectivity work after the wildpackets drivers are installed too so we're way happy replacing the way overpriced NA sniffer and support.
It seems both vendors require use of their Aironet drivers, whch means you cannot use upgraded Cisco wireless client drivers to be an up-to-date wireless user and a wireless packet analyzer on the same machine.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...