cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
327
Views
0
Helpful
2
Replies

snmp extensions for airespace

ericgarnel
Level 7
Level 7

We switched from the 350 aps to the new WCS

solution. Previously, we were able to monitor associated clients per AP and roll the data into MRTG & Cacti. Is there a way to do it with the airespace APs or controllers? The OID for the aironet was .1.3.6.1.4.1.9.9.273.1.1.2.1.1.1 , but I was not able to find a similar one from a walk on one of our 4400 controllers

2 Replies 2

rmushtaq
Level 8
Level 8

Mostly the MIBs are applicable for IOS based APs. If the WCS don't run IOS, then this may not work.

I was able to find MIBS for the controllers

from bsnwras.my:

"bsnDot11EssNumberOfMobileStations OBJECT-TYPE

SYNTAX Counter32

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"No of Mobile Stations currently associated with the WLAN."

::= { bsnDot11EssEntry 38 }"

May be what I am looking for..

Review Cisco Networking products for a $25 gift card