SNMP Managed Object to Get/Set Current Transmit-Key of Aironet 1100 (WEP)

[bjlim]

Hi,

I'd like to know what is snmp managed object to get/set default or current transmit-key of 4 WEP (encryption) keys...

Even though I took a good look at every snmp mibs related to cisco aironet 1100, I could not find it...

Please help me...

Thanks,

Bumjong

[#2]

You can get the OID from the following location:

ftp://ftp.cisco.com/pub/mibs/v1/

[bjlim]

Thank you for your response...

Actually I could find most OIDs to configure AP (Aironet 1100) parameters such as SSID, TxPower Level, Channel ID and ... on that ftp site but I could not find OID(s) to configure current transmit key (current WEP Key ID)...

Thanks,

Bumjong

[rmushtaq]

See if the following helps:

.1.3.6.1.4.1.522.3.6.1.3.1.3

awcDot11WEPDefaultKeyValue OBJECT-TYPE

-- FROM AWCVX-MIB

-- TEXTUAL CONVENTION WEPKeytype128

SYNTAX OCTET STRING (5..13)

MAX-ACCESS read-write

STATUS Current

DESCRIPTION "A WEP default secret key value. The value is

write-only (attempt to read will result in

return of a zero-length string)."

[bjlim]

Thank you for your information...

Unfortunately Aironet 1100 Series AP does not support aironet mib (1.3.6.1.4.1.522 and OIDs below 1.3.6.1.4.1.522) any more...so I think I have to use another OIDs which belongs to cisco...

Thanks,

Bumjong