Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

snmpset TruthValue question

hello,

I have the following MIB object:

cdot11SecAuxSsidAuthEnabled OBJECT-TYPE

SYNTAX TruthValue

MAX-ACCESS read-write

STATUS current

root@teo:/home/teo# snmpwalk -v 2c -c demopublic 192.168.1.11 CISCO-DOT11-SSID-SECURITY-MIB::cdot11SecAuxSsidAuthEnabledCISCO-DOT11-SSID-SECURITY-MIB::cdot11SecAuxSsidAuthEnabled."gstam-cisco".1 = INTEGER: true(1)

CISCO-DOT11-SSID-SECURITY-MIB::cdot11SecAuxSsidAuthEnabled."gstam-cisco".2 = INTEGER: false(2)

CISCO-DOT11-SSID-SECURITY-MIB::cdot11SecAuxSsidAuthEnabled."gstam-cisco".3 = INTEGER: false(2)

how can i write a false value to the following object?

CISCO-DOT11-SSID-SECURITY-MIB::cdot11SecAuxSsidAuthEnabledCISCO-DOT11-SSID-SECURITY-MIB::cdot11SecAuxSsidAuthEnabled."gstam-cisco".1 = INTEGER: true(1)

i have tried this but it doesnt work:

snmpset -v 2c -c demopublic 192.168.1.11 CISCO-DOT11-SSID-SECURITY-MIB::cdot11SecAuxSsidAuthEnabled."gstam-cisco".1 = 2

CISCO-DOT11-SSID-SECURITY-MIB::cdot11SecAuxSsidAuthEnabled.gstam-cisco.1: Unknown Object Identifier (Index out of range: gstam-cisco (cdot11SecAuxSsid))

2 REPLIES
Cisco Employee

Re: snmpset TruthValue question

You might have to change your syntax and specify that it is an integer type...not sure what your snmp util is

ex)

snmpset -v 2c private 192.168.1.11 cdot11SecAuxSsidAuthEnabled.1 integer 1

New Member

Re: snmpset TruthValue question

snmpset -v 2c private 192.168.1.11 cdot11SecAuxSsidAuthEnabled.1 i 1

thanks !!!

1590
Views
0
Helpful
2
Replies