Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

ssh and telnet for Acess point

What the function are you able to do in the Lightweight AP when you connected via SSH and Telnet to AP

debug

show

enable

or

Enable

Debug

Show

which one is correct out these

3 REPLIES
Hall of Fame Super Gold

ssh and telnet for Acess point

I believe only show.

Debug are all done on the WLC.  You can do "enable" too.

Community Member

ssh and telnet for Acess point

Silver

ssh and telnet for Acess point

The whole purpose of LAP is to be manage centrally that is why one is not supposed to be doing any configuration in the AP  .However only for configuration purpose one can do the trouble shooting on the AP that is why certain command like debug, show etc are allowed. Here is a link to some of the generally asked questions related to LAP.

        http://www.cisco.com/image/gif/paws/70278/lap_faq.pdf

295
Views
0
Helpful
3
Replies
CreatePlease to create content