Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SSID assignment

We plan on implementing a WLC4402/1252 APs at one of our locations. Currently we use "fat" 1242 APs in selected areas and also deploy MS-PEAP using a Microsoft RADIUS server. We would like to have the ability to assign SSIDs based on Active Directory user logins while keeping MS-PEAP in place. I saw some documentation that showed the WLC using a Microsoft RADIUS server for dynamic VLAN assignment. I am wondering if there is anyway to assign SSIDs as well VLAN based on AD user credentials using the WLC. Or perhaps the dynamic VLAN assignment is enough?

Any information, docs, examples configs, etc would be greatly appreciated. Thx.

Joe

2 REPLIES

Re: SSID assignment

Joe,

Please see this link,

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807669af.shtml

If EAP and SSID-based authentication are successful, the user is allowed to access the WLAN or else the user is disassociated.

Regards,

~JG

Do rate helpful posts

Hall of Fame Super Red

Re: SSID assignment

Hi Joe,

I think your last statement is correct :) For what you are trying to do Dynamic Vlan Assignment should be all you need. The SSID portion becomes unnecessary when using this config.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml

Hope this helps!

Rob

237
Views
0
Helpful
2
Replies