Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Task 2: Configuring NADs for Cisco ISE

hi all

I am trying to study Unified access Bootcmap lab in my office. i have made my lab but i'm in the trouble for NAD's
Boot Camp Lab Guide already configured. so i couldn't know how configuring in my lab.
as you can in the figure that i want to know. the whole configuration anybody know about that?

i atteched word file. this is unified access bootcamp 110 page

2 REPLIES
Cisco Employee

check the following links for

check the following links for NAD(Switch/WLC) configuration to support ISE

http://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/design-zone-security/howto_10_universal_switch_config.pdf

http://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/design-zone-security/howto_11_universal_wlc_config.pdf

VIP Purple

HiIf you want simply add a

Hi

If you want simply add a NAD to your ISE you can do that via below

Administration > Network Resources > Network Devices

In this example I have configured 3850 switch as NAD with ISE. Hope that gives you some guidance

http://mrncciew.com/2013/12/06/wlan-config-with-3850-part-2/

 

HTH

Rasika

**** Pls rate all useful responses ****

112
Views
0
Helpful
2
Replies