MIC and TKIP are part of the Aironet extensions if the client card does not understand the aironet extensions then they will not be able to use these features. If you turn on TKIP then all devices must use it.
So the answer is NO you can not use these features with Non Cisco cards
Most switches now support 802.1q using software or firmware upgrades. If you can upgrade the LAN to support 802.1q then buy a low end router that support 802.1q VLAN routing.. I think I can remember doing this on a 1700.
Failing that, use a router with 2 Ethernet NICs. One ethernet NIC to the wired LAN and the other Ethernet NIC running 802.1q to the AP. Configure InterVLAN routing since all networks (physical and logical) will need to be on a different subnet (Unless IRB functions over the 802.1q to physical link).
IntroductionHow to use the Wireless LAN Controller Configuration Analyzer (WLCCA)
Javier Contreras is a Senior Tech Lead for the Wireless Business Unit in Cisco, with over 2 decades of experi...
< PRE >
(#)For this reason being that : - application that doesn't use multicast, sends one copy of each packet ( data unit of traffic at layer 3 ) to each client (" who seeks the traffic ).- application that does use multicast, sends ...
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...