cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
642
Views
0
Helpful
4
Replies

Transmit/Receive Retries

Ed Armstrong
Level 1
Level 1

I have taken over the support requirements on a wireless network utilising lightweight access points, a 5508 wireless LAN controller and a Prime Infrastructure NMS and it appears to be underperforming.  How can I display the transmit/receive retry and CRC error statistics from the access points?           

4 Replies 4

Leo Laohoo
Hall of Fame
Hall of Fame

With WLC you can see those errors on a per-client.

Sent from Cisco Technical Support Nintendo App

I saw the per client analysis but we are talking several hundred access points with a huge number of clients.  I was more looking for a table or report on the access points.

See whether "show ap stats x" CLI commands helps as shown below.

(WLC) >show ap stats ethernet

(WLC) >show ap stats 802.11a

(WLC) >show ap stats 802.11b

HTH

Rasika

**** Pls rate all useful responses ****

zhenningx
Level 4
Level 4

You can run a "802.11 Counters" report in PI under Reports > Performance.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: