Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Turning on TKIP and MIC

How do you turn on TKIP and MIC? I am running 11.10t firmware on the AP's.

4 REPLIES
Community Member

Re: Turning on TKIP and MIC

Click on the AP radio advanced link in the main setup menu. Then look for Enhanced MIC verification for WEP and Temporal Key Integrity Protocol. You will want to change your Broadcat WEP Key rotation interval, too.

Community Member

Re: Turning on TKIP and MIC

URL:

BTW, you only need to turn on broadcast key rotation if you are using EAP.

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/350brdgs/brscg/br350ch4.htm

Community Member

Re: Turning on TKIP and MIC

Important Note:

If you turn up TKIP and MIC you will not be able to authenticate to the Wireless LAN from any PocketPC device. At least not until a new Cisco Client comes out that supports this in PocketPC.

Ray

Community Member

Re: Turning on TKIP and MIC

I have now enabled TKIP and MIC, but I am getting the following message in the AP's logs: "Unsupported Authentication Algorithm". I have ACU 5.01, NDIS 8.01.06, Firmware 4.25.23. Any ideas? I appear to be working, but not sure why I am getting this message.

234
Views
0
Helpful
4
Replies
CreatePlease to create content