Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Two WLC to the same NPS Radius (win 2008)

Hi everyone :

I have a WLC 2504 running with one SSID (authentication 802.1X to NPS radius win 2008 Server) , I have another branch with another WLC 2504.

Can I have configure the same SSID with the same NPS radiud win 2008 server in this another WLC 2504?? and How could I do it?

Regards,

Claudio L.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Two WLC to the same NPS Radius (win 2008)

Yes you can. You just need to configure the other WLC WLAN settings the same, add the radius server and add the WLC as a AAA client in the radius server.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
5 REPLIES
Hall of Fame Super Silver

Re: Two WLC to the same NPS Radius (win 2008)

Yes you can. You just need to configure the other WLC WLAN settings the same, add the radius server and add the WLC as a AAA client in the radius server.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Community Member

Two WLC to the same NPS Radius (win 2008)

Hi Scoott,

Thank you so much for your response.

I have used this guide to configure this deployment :

http://www.cisco.com/en/US/products/ps10315/products_configuration_example09186a0080bfb19a.shtml

In win 2008 server , I just only add the WLC like a new Radius Client ?

I mean ,

Frienly Name : WLC2

Address IP : 192.168.1.X

Vendor : Radius Standard

Share secret : xxxx

And That´s all, right ?

Hall of Fame Super Silver

Re: Two WLC to the same NPS Radius (win 2008)

That is correct.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Community Member

Re: Two WLC to the same NPS Radius (win 2008)

Thank you so much !!!

Sent from Cisco Technical Support iPad App

Hall of Fame Super Silver

Re: Two WLC to the same NPS Radius (win 2008)

No problem:)

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
192
Views
0
Helpful
5
Replies
CreatePlease to create content