UDP from wired side not being transmitted by wireless
I posted this question elsewhere, but think this might be a better place. I have a device that transmits UDP, which all clients on the wired VLAN get to see. However, the WLC2112 does not trasmit those UDP Packets out to the wireless clients, which is a real problem for a specific application I need to run.
I have set network broadcast enable, but it doesn't work.
On an aisde, I keep losing web access, there's another issue to contend with.
This is becoming critical now as the UDP is vital to a large install that needs it.
Would anyone with any suggestions please post back and let me know anything that might be worth looking at.
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
firstname.lastname@example.org. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...