Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

unable to access the secondary WISM from the diffrent VLAN

Hi,

We have got 2 WISM,We are able to access the primary WISM from the diffrent VLAN through GUI mode,But we are not able to access the secondary WISM from diffrent VLAN through GUI mode.We are able to access the secondary WISM from WISM management VLAN.I am attaching the WISM management config below.

Core1

----

VLAN 4 ---- Wism Management

ip address 172.16.10.2/24

HSRP 172.16.10.1

Primary WISM IP address 172.16.10.4

Core2

-----

VLAN 4 ---- Wism Management

ip address 172.16.10.3/24

HSRP 172.16.10.1

Secondary WISM IP address 172.16.10.5

Can any one get me the solution for this.

Regds

Saji k.s

---------

1 REPLY
Anonymous
N/A

Re: unable to access the secondary WISM from the diffrent VLAN

Check if the routing from VLAN is enabled . Make sure Management and Ap-Manager interface must be un-tagged for example Vlan 0 when they are on the Native Vlan of the trunk. Remove the tags from the management interface.

Also check if you have Filters created that blocks access to secondary WiSM.

181
Views
0
Helpful
1
Replies