Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Unable to integrate WLC with cisco ACS

                 Hi,

I am not able to integrate Cisco Tacas with WLC

Below are the error logs in Juniper firewall

WLC IP: 10.210.126.133

Cisco ACS: 10.116.45.131

Date/Time

Source Address/Port

Destination Address/Port

Translated Source Address/Port

Translated Destination Address/Port

Service

Duration

Bytes Sent

Bytes Received

Close Reason

2013-11-04 16:31:03

10.210.126.133:49098

10.116.45.131:49

10.210.126.133:49098

10.116.45.131:49

TCP PORT 49

2 sec.

591

428

Close - TCP FIN

2013-11-04 16:31:03

10.210.126.133:51759

10.116.45.131:49

10.210.126.133:51759

10.116.45.131:49

TCP PORT 49

2 sec.

525

326

Close - TCP FIN

                       

2013-11-04 16:31:09

10.210.126.133:51759

10.116.45.131:49

10.210.126.133:51759

10.116.45.131:49

TCP PORT 49

9 sec.

475

238

Close - TCP FIN

2013-11-04 16:31:09

10.210.126.133:49098

10.116.45.131:49

10.210.126.133:49098

10.116.45.131:49

TCP PORT 49

9 sec.

519

318

Close - TCP FIN

Pls suggest further whether any changes needs to be done in any end

Cisco ACS Srver

11/04/2013

16:31:01

Author failed

ads.shalder

DCN-BANG2&BANG5-RW

127.0.0.1

..

Service denied

service=ciscowlc protocol=common

..

10.210.126.133

ads.shalder

No

1

10.210.126.133

..

Pls suggest further

Br/Subhojit

3 REPLIES
Hall of Fame Super Silver

Re: Unable to integrate WLC with cisco ACS

What version of WLC and ACS?

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Community Member

Unable to integrate WLC with cisco ACS

HI,

WLC Version:7.2.111.3

Cisco ACS Version: 4.2

We are using cisco ACS for Mgmt access as the ACS is integrated with our Enterpresie ID for loging to the device

In case the above version is not compatible, pls suggest further / any upgrade is required on WLC side

Thanks

Br/Subhojit

Community Member

Unable to integrate WLC with cisco ACS

Hi,

we are getting this error on WLC side debug

(Cisco Controller) >*tplusTransportThread: Nov 05 09:51:32.683: Forwarding request to 10.116.45.131 port=49

*tplusTransportThread: Nov 05 09:51:32.689: tplus auth response: type=1 seq_no=2 session_id=5b675ca1 length=16 encrypted=0

*tplusTransportThread: Nov 05 09:51:32.689: TPLUS_AUTHEN_STATUS_GETPASS

*tplusTransportThread: Nov 05 09:51:32.689: auth_cont get_pass reply: pkt_length=25

*tplusTransportThread: Nov 05 09:51:32.689: processTplusAuthResponse: Continue auth transaction
*tplusTransportThread: Nov 05 09:51:32.700: tplus auth response: type=1 seq_no=4 session_id=5b675ca1 length=6 encrypted=0

*tplusTransportThread: Nov 05 09:51:32.700: tplus_make_author_request() from tplus_authen_passed returns rc=0

*tplusTransportThread: Nov 05 09:51:32.700: Forwarding request to 10.116.45.131 port=49

*tplusTransportThread: Nov 05 09:51:32.705: author response body: status=16 arg_cnt=0 msg_len=0 data_len=0

*tplusTransportThread: Nov 05 09:51:32.705: Tplus authorization for ads.shalder failed status=16

WLC hardware is: AIR-CT2504-K9V01

Br/Subhojit

192
Views
0
Helpful
3
Replies
CreatePlease to create content