cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
233
Views
0
Helpful
1
Replies

Upgrading 2000 controller issue

Jalberts1
Level 1
Level 1

When we go to upload the newest version onto the controller, we get an error. "Unable to load to flash". I am guessing this is a piece of bad memory.

1 Reply 1

rupert.wever
Level 1
Level 1

I got that error too. It turns out the tftp server I used was not reliable (what happens when you get used to using wireless for everything). The controller gets confused and thinks the download is complete - when it tries to save it to flash, ir fails. It would be great if the controller supported ftp downloads as well, but in the mean time, make sure you use a dedicated tftp server (at least for this download).

Review Cisco Networking products for a $25 gift card