Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Uploading logo in default web authentication page @ WLC 5508

Hi,

I trying to upload my company logo in the Web Authentication page @ WLC 5508. In GUI can see an option for cisco logo that says view or hide but i dont see any other option to upload custom logo. I tried to upload my gif/jpg image using TFTPD32 but not working. I did the following...

(Cisco Controller) >(Cisco Controller) >transfer download mode ftp

(Cisco Controller) >transfer download datatype image

(Cisco Controller) >transfer download serverip 2.2.2.12

(Cisco Controller) >transfer download path D:\Test

(Cisco Controller) >transfer download filename test1.GIF

(Cisco Controller) >transfer download start

Mode............................................. TFTP Data

Type........................................ Login Image TFTP

Server IP................................... 2.2.2.12TFTP Packet

Timeout.............................. 6TFTP

Max Retries................................. 10TFTP

Path........................................ D:\Test/

TFTP Filename.................................... test1.GIF

This may take some time.Are you sure you want to start? (y/N) y

TFTP Image transfer starting.% Error: Image file transfer failed - Error from server: File not found

(Cisco Controller) >ping 2.2.2.12Send count=3, Receive count=3 from 2.2.2.12

I verified both path and file and they are fine. Is there an option were i can upload the image file ???

1 REPLY

Re: Uploading logo in default web authentication page @ WLC 5508

where does your TFTP point to for it's "root" folder?  if it already points at D:\Test, then you only need to put the / for the path

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
1317
Views
0
Helpful
1
Replies
CreatePlease login to create content