Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Use 2504 WLC as Anchor Controller

Hello all,

This may be a thread already, but I am unable to find what I need.

I have the above mentioned controller which provides both DMZ access ( internet) and internal network access.Each type of network has a dedicated interface in the controller going to the switches.

I would like to encrypt the traffic from the laptops in the DMZ and use PSK, but I don't want a separate controller for that.

Can I use the existing one and is there any design I can find on it?

The OS version on the WLC is 7.5.102.

  Thanks&Regards,

  Vlad

1 REPLY
VIP Purple

Use 2504 WLC as Anchor Controller

Yes, you should be able to create two different SSID with different secuirty policy on the same controller (ex Guest SSID- WebAuth, Data SSID - WPA2/AES-PSK). You can map these two SSID for two different interfaces in DMZ switch  where you can control/isolate traffic between these two SSID.

HTH

Rasika

**** Pls rate all useful responses ****

162
Views
0
Helpful
1
Replies
CreatePlease login to create content