Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Useful OIDs to poll from WISM 5.0.148.0

Can advise if there are any good and important OIDs that we can snmp poll from WISM 5.0.148.0. Thks.

2 REPLIES

Re: Useful OIDs to poll from WISM 5.0.148.0

check out this url:

http://forums.cacti.net/viewtopic.php?t=12863&highlight=4400

snippet:

making some progress. Here is a link that is extremely helpful

ftp://ftp.cisco.com/pub/mibs/oid/AIRESPACE-WIRELESS-MIB.oid

and

ftp://ftp.cisco.com/pub/mibs/oid/AIRESPACE-SWITCHING-MIB.oid

I have been able to glean some useful info so far:

bsnSensorTemperature" "1.3.6.1.4.1.14179.2.3.1.13"

bsnTemperatureAlarmLowLimit" "1.3.6.1.4.1.14179.2.3.1.14"

"bsnTemperatureAlarmHighLimit" "1.3.6.1.4.1.14179.2.3.1.15"

"agentTotalMemory" "1.3.6.1.4.1.14179.1.1.5.2"

"agentFreeMemory" "1.3.6.1.4.1.14179.1.1.5.3"

You may need to dig thru the xml files in the url posted above to get more info.

New Member

Re: Useful OIDs to poll from WISM 5.0.148.0

snmpwalk -c public 2.2.2.2 .1.3.6.1.4.1.14179.2.1.1.1.38

enterprises.14179.2.1.1.1.38.1 = Counter32: 1

enterprises.14179.2.1.1.1.38.2 = Counter32: 0

enterprises.14179.2.1.1.1.38.3 = Counter32: 0

enterprises.14179.2.1.1.1.38.4 = Counter32: 0

enterprises.14179.2.1.1.1.38.5 = Counter32: 1

enterprises.14179.2.1.1.1.38.6 = Counter32: 0

enterprises.14179.2.1.1.1.38.7 = Counter32: 0

enterprises.14179.2.1.1.1.38.8 = Counter32: 0

enterprises.14179.2.1.1.1.38.9 = Counter32: 0

enterprises.14179.2.1.1.1.38.10 = Counter32: 0

enterprises.14179.2.1.1.1.38.11 = Counter32: 0

enterprises.14179.2.1.1.1.38.12 = Counter32: 0

enterprises.14179.2.1.1.1.38.13 = Counter32: 0

enterprises.14179.2.1.1.1.38.14 = Counter32: 0

Is there an OID that show the sum of all the mobile stations for all SSIDs. Above only show the number of mobile stations per ssid.

472
Views
0
Helpful
2
Replies
CreatePlease to create content