Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Using TACACS+ on WCS and WLC

Hello,

I am trying to setup TACACS+ on both a WLC and WCS. I want to use it for backend authentication, accounting and authorization on both if possible. I used the config guides to set the ACS (v3.3), WLC (v.4.2.112.0), and WCS (v.5.0.56.2).

I am not able to logon using the account I set up on the ACS. I did associate the TACACS+ group settings for the WLC and WCS to the ACS group so I am not really sure if I missed something or not.

Any help would be greatly appreciated!

Thanks

1 REPLY

Re: Using TACACS+ on WCS and WLC

Do you see any hits on acs passed or failed attempts ? Is authentication working from other devices like router/switches ?

Make sure that there is no communication issue between acs and wlc.

Check shared secret key ( retype it, do not copy /paste)

If you have also configured accounting /authorization, please disable.

Check it only with authentication configured.

Regards,

~JG

232
Views
0
Helpful
1
Replies