Using Windows 802.1x whith EAP-MD5 on Aironet 350 Adapter

[azambre]

Hello all,

I'm trying to use EAP-MD5 as the authentication mechanism with my Aironet Card and the Microsoft 802.1x stack under Win2K. Unfortunately, this choice is not possible while I can do it with legacy LAN cards. According to CCO litterature, it is supposed to be supported. Did anyone manage to have this working ?

Thanks in advance

Cyril

[sbilgi]

This is supported and it should work.

Check out this information:

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/350cards/windows/incfg/win_ch6.htm#xtocid20

[azambre]

I opened a TAC case about this issue and I was told it is not supported...