Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Virtual Wireless Lan Controller configuration

Dear All,

I have Virtual Wirelss lan controlle 7.0 and also have 1600,3600 cisco access point i want configure three SSID in vWLC or AP  like (STAFF,GUEST,MANAGER)

how to i can configure three SSID in AP or vWLC .what i have configure switch side like vlan

if you have any doc or configuration details please help me

i am waiting for your replay

Regards

Muhammed

2 REPLIES
VIP Purple

Re: Virtual Wireless Lan Controller configuration

Looks like vWLC 7.0 is not publicly available release (I can see douments for vWLC 7.3.x onwards)

Here is one deployment guide I can find from cisco.com

http://www.cisco.com/en/US/products/ps12723/products_tech_note09186a0080bd2d04.shtml

Regarding AP models for 1600 you required  minimum 7.4.100.0 code. 3600 required minimum 7.1.91.0

Refere the below compatibility matrix for that

http://www.cisco.com/en/US/products/ps12723/products_tech_note09186a0080bd2d04.shtml

So bottom line is you require vWLC 7.4 to support these AP models

HTH

Rasika

**** Pls rate all useful responses ****

Silver

Re: Virtual Wireless Lan Controller configuration

Kindly check the following link for wireless deployment (ios compatibility Matrix)

                 http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

161
Views
0
Helpful
2
Replies