I've been able to configure for WPA2 only under the WPA1+WP2 L2 security model, just select only the WPA2 options. I can get this to work using LEAP as the authentication method with Intel PROSet under XP. Dominic what authentication are you using - PEAP or EAP-TLS?
I have the same problem. But i can only select WPA or WPA2 in the WPA1+WPA2 section. Only WPA or WPA2 is not available in the layer 2 security. You have any solution at the moment or which version of the WISM you have?
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...