Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Vlan based on SSID

Folks,

         I have a requriement where the ACS server should send the vlan information based on SSID the user connected with.

Can I do this in ACS 5.0. I know I have to write a policy. But can not find a fild for SSID.

Any advice would be highly appreciated.

Thanks,

Parwal

2 REPLIES
Hall of Fame Super Silver

Re: Vlan based on SSID

You can do that on ACS. For the SSID filtering you have to create an end station filter using the DNIS: *SSID

You have to then place that in your policy. You can also specify the vlan assignment.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/policy_mod.html

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: Vlan based on SSID

If you want to do dynamic vlan assignment, you configure the vlan assignment in ACS under Policy Elements |

Authorization and Permissions | Network Access | Authorization Profiles

To specify the SSID:

Authorization and Permissions | Network Conditions | End Station Filters

-Scott
*** Please rate helpful posts ***
307
Views
0
Helpful
2
Replies
CreatePlease to create content