08-01-2008 01:49 AM - edited 07-03-2021 04:16 PM
I'd like to know if it is possible to use the same vlan for the management of the WCS and for configuring a wlan?
I try to make this lab and when I declare a dynamic interface that is in the same subnet as the WCS ip address, the reliability between controler and WCS is lost.
08-01-2008 05:05 AM
You should keep your wcs on the smae vlan as your wlc or in your management or server vlan. You shouldn't put the wcs on a vlan that you will have wireless devices on.
08-01-2008 05:55 AM
I know that I should not put servers on the same vlan as wireless client but I just want to know if it is possible or if Cisco implemented something to avoid this to understand why my lab didn't work with this configuration.
Thanks
08-01-2008 07:23 AM
There are issues when the dynamic interfaces attach to a local lan subnet. Best practice is to never have your dynamic interfaces on a subnet where you have wired users.....
Or else you will loose connectivity to your management.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide