Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

vWLC authentication

 

 Hello,

 I have recently configured vWLC and added a cisco AP. Also configured TACACS to get WLC autheticated through it. I am able to login on WLC through TACACS but i also want WLAN connection too get authenticated through this. So it is possible through TACACS or i need to switch over RADIUS configration.

Pls help..

3 REPLIES
VIP Purple

If you have ACS or ISE server

If you have ACS or ISE server then you can do it.

Here is the TACAS config example on WLC:

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/91631-uwn-tacacs-config.html

http://rscciew.wordpress.com/2014/01/25/configure-radius-server-on-wlc/

 

Regards

Dont forget to rate helpful posts

New Member

   Hi..Thanks for this Info,

 

 


 Hi..

Thanks for this Info, but that is not actually what i am looking for. I can login on WLC through TACACS but i want wlan ssid also authnticate through TACACS so my question is that is this possible using TACACS config and if yes then how.

 Pls see in attachment & help.

Silver

here is the configuration you

here is the configuration you are looking for

https://supportforums.cisco.com/discussion/12158376/vwlc-authentication

http://alessandrobonafini.wordpress.com/2012/11/28/how-to-configure-tacacs-on-cisco-acs-5-2-for-cuwn-part-1-wlc/

and  complete guide

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-2/configuration/guide/cg/cg_gettingstarted.html

75
Views
0
Helpful
3
Replies