Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WCS 4.1.83.0 <-> WLC 4.1.171. inconsistencies

Hello,

we upgraded to the above systems in the following order:

WCS to 4.1.83

WLC to 4.0.217

WLC to 4.1.171 (+bootloader update)

Now we have the following issues:

the Controllers pushed the updates towards the APs. We can confirm the 4.1.171 on the APs via the WLCs, but the WCS does always show older versions in the AP summaries, which results in problems with template rollouts (f.e. because the WLC thinks, that a 4.0.xxx AP /controller combo is not able to handle the new 4.1 templates).

When we change an option of an AP via the controller and do an audit on the WCS, THEN the WLC shows the current AP software correctly.

Is is possible to do an general audit, so we dont have to do this on every AP individually?

2 REPLIES

Re: WCS 4.1.83.0 <-> WLC 4.1.171. inconsistencies

What happens after you refresh the config from the controllers under WCS?

New Member

Re: WCS 4.1.83.0 <-> WLC 4.1.171. inconsistencies

It solved the problem. Thank you.

207
Views
10
Helpful
2
Replies