WCS 7.0 with ACS 5.1

[vinodjad1234]

Hi,

I want to add WCS as a AAA client for authentication with Radius  in my set-up.

how to configure WCS for the same.

where are all those options in WCS.

Please guide me for the same.

[Surendra BG]

Here is the link..

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a0080851f7c.shtml#topic5

lemme know if this answered your question..

Regards

Surendra

[vinodjad1234]

Hi,

The link which you have shared knowledge is related to ACS 4.0 and WCS with tacacs , I need details about WCS with Radius and ACS 5.1.

Please share knowledge for the same.

thanks for your time.

[volven.didata · Accepted solution]

Hi Vinod,

See this : http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0admin.html#wp1191980

It's from the Cisco Wireless Control System Configuration Guide, Release 7.0 , Chapter 18 - Administrative Tasks.

You should be able to follow the steps and achieve what you are looking for...

Cheers

Volven

[vinodjad1234]

Thanks for sharing the link,

Have you worked on WCS 7.0 ?

[volven.didata]

Have worked on it in the LAB, will be doing a deployment in Jan.

Cheers

Volven

[Nicholas Poole]

Has anybody got any experience with trying the config as depicted in the WCS 7 config guide?

I have tried today to integrate WCS 7 with ACS 5.1 and got a partial success.  I have created a unique Shell Profile that invokes for the WCS only which contains 1 role (role0=Root) and 73 task entries (as copied from the WCS group pages) and I can log in to WCS with the new account, but some things I dont appear to have priviledges for, such as Reports.  Is there any way to debug which task WCS thinks I dont have to do this?  Any other ideas?

[Peter Nugent]

I did this recently and it worke ok.

Check all of the tasks are included correctly