Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WCS Association History Duration

Hello,

I have a lot clients that show many 28 min 48 sec association duration. Is this a problem with the wireless network or client drivers? It's happening with more than one brand of wireless card and different brand of computers.

WCS and 5508 WLC with latest version.

Dan.

5 REPLIES
New Member

Re: WCS Association History Duration

see attachment

Re: WCS Association History Duration

Could go either ways, I have not seen specific defects on your WLC version regarding this issue. I would suspect either configuration issue or NIC drivers first.

New Member

Re: WCS Association History Duration

Can you post a config of the controller or AP config? Whichever is managing the network. Check the Client Detail Report for information on the clients themselves and post this as well.

http://www.cisco.com/en/US/docs/wireless/wlse/2.7/user/guide/reports.html#wp1028570

Cisco Employee

Re: WCS Association History Duration

Is the wlan session timeout set at default 30 mins?

New Member

Re: WCS Association History Duration

Ah yes. It is set to 1800 seconds.

The documentation says:

Set the maximum time, in seconds, for a client session before requiring reauthorization.

The default values are for the following Layer 2 security types:

* 1800-802.1X; Static WEP+802.1X; WPA+WPA2 with 802.1X, CCKM, or 802.1X+CCKM authentication key management

* 0-All other Layer 2 security types.

So I guess I should set it to 0? or Disable it?

Thanks,

Dan.

225
Views
0
Helpful
5
Replies
CreatePlease login to create content