Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

WCS from Base to Plus, AP Count rising

Dear Team, need urgent some Info. One of my Customers has initially buyed and implemented WCS Base with 100 AP Licens. Then Upgraded with Plus-Upgrade Licenses to 500 APs. Now a second upgrade to 1000 APs is needed. Which Licenses needs the Customer to purchase, Base and Upgrade, or only Upgrade?

Regards, Michael

1 REPLY
Hall of Fame Super Silver

WCS from Base to Plus, AP Count rising

Michael.

Maybe this will help:

SINGLE SERVER AND ENTERPRISE LICENSES

• Single server and Enterprise licenses can co-exist on a Cisco WCS server if the single server license is Cisco WCS PLUS. If a Cisco WCS Base license was ordered initially, it must be upgraded to a Cisco WCS PLUS license before the enterprise license can be added to the single server license.

Example: A customer has an existing Cisco WCS Base license for 500 access points (WCS-APBASE-500). The customer wants to add an additional quantity of 800 access points on multiple Cisco WCS servers for a total of 1300 access points.

Purchase: (1) WCS-PLUS-UPG-500 to upgrade the existing 500 Cisco WCS Base license to a Cisco WCS PLUS license, and (1) WCS-ENT-1000 to support the new 800 access points.

• Once allocated to a server, enterprise licenses cannot be broken down into smaller increments. For example, if a license of 1000 is allocated in increments of 250 within the network, you cannot break down the 250 allocation further.

http://www.cisco.com/en/US/prod/collateral/wireless/ps5755/ps6301/ps6305/product_data_sheet0900aecd804b4646.html

-Scott
*** Please rate helpful posts ***
506
Views
0
Helpful
1
Replies
CreatePlease to create content