Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WCS & MSE

Hi

Just purchased a 3355 and installed, followed the set up no problems, added to WCS.

Then WCS says no longer able to be reached. 

Unable to ping, have to keep running the setup./opt/mse/setup/setup.sh seems, like the settings are not being kept.

Tried /opt/mse/setup/setup.log and sasys I have no permission, this is when logged in as root.       

Any help appreciated, we've supposedly got support on it, but trying to track down who with.

cheers in advance.


Craig        

Everyone's tags (2)
4 REPLIES
New Member

WCS & MSE

Hi Craig,

just to make sure as you didn't provide the whole command or an CLI output - have you used "more" to check the log.....

[root@MSE /]# more /opt/mse/setup/setup.log

....as without it you'll get the permission denied message......

[root@MSE /]# /opt/mse/setup/setup.log

-bash: /opt/mse/setup/setup.log: Permission denied

[root@MSE /]#

Ron

Cisco Employee

WCS & MSE

Please make sure that eth0 is up and have ip address after the initial setup by running the following command:

ifconfig

Also make sure that eth0 is the one that is connected to your network and its ip address is the one added on WCS cause it is the interface that is used for communication between the MSE and WCS.

Check the following link it should be helpful to physically locate correct interfaces:

http://www.cisco.com/en/US/docs/wireless/mse/3355/user/guide/mse_qsgmain.html

----------------------------------------------------------------------------------------------------------------------------

Please make sure to rate correct answers

New Member

WCS & MSE

Hi

Thanks for the command.  It proved the MSE isn't keeping it static IP.

Is been reported back now to Cisco as DOE.

cheers

Cisco Employee

WCS & MSE

Great

----------------------------------------------------------------------------------------------------------

Please make sure to rate correct answers and flag the thread as answered

512
Views
0
Helpful
4
Replies