WDS authentication problem: "EAP failure received in clear text"
A installed a WDS with ACS 3.3 trial in conjunction with RSA SecureID ACE Server authentication. I use (EAP-GTC PEAP).
I use HP laptop with Intel PRO/Wireless 2200BG adapter and Intel software.
When authenticating ACE server accepts my login ("passcode accepted" message in ACE log). Despite this success authentication fails in WDS and there is no entry among nor failed attepts nor Passed attempts in the ACS log.
It is impossible is not it?
In WDS AP's log: "dot11_auth_dot1x_send_client_fail: Authentication failed for ..." (MAC)
The client software (Intel PROSet/Wireless) reports "EAP failure received in clear text" in its event log.
IntroductionHow to use the Wireless LAN Controller Configuration Analyzer (WLCCA)
Javier Contreras is a Senior Tech Lead for the Wireless Business Unit in Cisco, with over 2 decades of experi...
< PRE >
(#)For this reason being that : - application that doesn't use multicast, sends one copy of each packet ( data unit of traffic at layer 3 ) to each client (" who seeks the traffic ).- application that does use multicast, sends ...
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...