Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

WDS & Infrastucture APs Authentication

Hello,

I have a question about WDS.

The only authentication method that is available for WDS AP to authenticate the infrastructure APs is only LEAP

or we can use another EAP protocol? For example EAP-FAST?

Thanks in advance.

2 REPLIES
Cisco Employee

Re: WDS & Infrastucture APs Authentication

Hi Christos,

you should be able to go with eap-fast.

wlccp ap eap profile ?
  WORD  EAP profile name

This command ties an eap profile for wds ap authentication.

You have to configure that profile before :

AP1240(config)#eap profile test
AP1240config-eap-profile)#method fast

I didn't try to configure it myself but the commands are pretty clear I guess

Best Regards,

Nicolas

===

Please rate answers that you find useful

Re: WDS & Infrastucture APs Authentication

Thanks for your response Nicolas.

I'll test the configuration with EAP-FAST and i'll let you know..

Regards.

245
Views
5
Helpful
2
Replies
CreatePlease to create content