Maintaining client credentials dpends on the type of client. There is a keep alive between AP and the client, which depends on AP configuration and type of the client.I have tested it for a cisco client. If it is a Cisco client, AP detects the client is away pretty quickly and removes from its association list. Once that happens, the client will stay in WDS's cache list, in detached state, for about 10 minutes. I am not sure about other clients.
Did you manage to configure an WDS and other APs in the same subnet just to use Radio Management without any authentication? I don't need fast roaming. Do I still need any Radius server? Could I just use one WDS, some infrastuctured APs and WLSE to use Radio management??
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...