Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WEP + Radius Mac filter

I am setup a cisco WLC in ver 4.0

I setup a 40bits static wep key for user to use. it is work till i add the mac address filter. it can work with local mac filter. If I want to use Cisco ACS to auth mac address, the controller also have this message

RADIUS server "IP Address":1645 failed to respond to request (ID 24) for client "MAC Address: / user 'unknown'

Is it have something problem in the WLC, I am following the configure sample to config both of the WLC and ACS.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008084f13b.shtml

thank you very much

1 REPLY
Bronze

Re: WEP + Radius Mac filter

"RADIUS server "IP Address":1645 failed to respond to request (ID 24) for client "MAC Address" - Check there is connectivity between WLC and ACS. Also, check whether the username credentials are correctly given.

305
Views
0
Helpful
1
Replies