Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WEPS Keys with PEAP

With LEAP I can cause WEP keys to re-negotiate by setting the session time-out RADIUS attr.

However, when I use this attribute for a PEAP authenticate user, it prompts the user to re-enter there authentication credentials.

AP 1200 running 11.56 and CSACS 3.1. PEAP authentication is against a RADIUS Token Server.

Thanks

1 REPLY
New Member

Re: WEPS Keys with PEAP

PEAP supports silent session resume (upon RADIUS session timeout) when only the first phase of PEAP is executed. In the second phase, the previous authentication state is reused. Hence, users will not be required to re-authenticate until the PEAP session timeout expires. The duration time of the PEAP session timeout is configurable from Cisco Secure ACS graphical user interface (GUI).

Check the following URL for more details

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_qanda_item09186a008010018c.shtml

140
Views
0
Helpful
1
Replies