I have many wgb configured with leap. i have 2 acs server. Is there any configureation, that when the first acs is down or something like that that the wgb asks the second acs endless? The problem is that sometimes when the prim acs failes we have to reboot the wgbs bc they cannt authentitcate over leap. what is the best configuration in the Bridge under Authentication server? or is there a counter or something like that in the wgb?
The problem is that we cant call the 200 customer, please reboot the wgb. =)
Actually, you can configure up to four servers for authentication services, so you can set up backup authenticators. If you set up more than one server for the same service, the server first in the list is the primary server for that service, and the others are used in list order when the previous server times out.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...