Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Silver

Wildcard masking

Say you have

Network

192.168.10.0/24

With IP address Range:

192.168.10.1 through 192.168.10.254

Broadcast: 192.168.10.255

And you want to block the address range 192.168.10.10 through 192.168.10.20 from the network 192.168.10.0/24

How would you find out the correct wildcard mask for the address range 192.168.10.10 through 192.168.10.20, which would only block this range from the network 192.168.10.0/24

---

Posted by WebUser Haroon David Peter

2 REPLIES
Hall of Fame Super Silver

Re: Wildcard masking

Take a look at this online calc. You only can block certain ranges.

http://www.subnet-calculator.com/wildcard.php

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Re: Wildcard masking

Looking at the space you would need to use multiple masks. You could do a /31 and start with .10, .12 .14 .16 .18 and then exclude .20 on its own. If you use the /31 with .20 you'll also exclude .21. If you open the mask by one, you'll start at .8 then .16 and still have to exclude .20 on its own.

The first would seem to be the better route but you'll still need multiple statements to cover the address you want to exclude

Sent from Cisco Technical Support iPad App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
482
Views
0
Helpful
2
Replies