Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Windows 2008 R2 Radius configuration issue..

Hello Support Team,

I have a Windows 2008 R2 server, i want to configured NPS (Radius) Server on windows 2008 server for WLC client and AD users autentication.

I am tried to configured but failed. AD users are not autenticated.

have you any guide for windows Radius configutation please share.

9 REPLIES
Hall of Fame Super Silver

Re: Windows 2008 R2 Radius configuration issue..

Take a look at this guide.

EDIT: Sorry bad cut n paste

http://communities.intel.com/servlet/JiveServlet/previewBody/4321-102-1-7037/SImple%20NPS%20Configuration%20as%20Radius%20Part%201.pdf

HTH

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
New Member

Re: Windows 2008 R2 Radius configuration issue..

Thankx for the reply Scott.

But this not my answer..

Thanks,

Chandan

Hall of Fame Super Silver

Re: Windows 2008 R2 Radius configuration issue..

I edited the other post since I pasted the wrong link. You can also look at any IAS configuration because they are pretty close as to the policy configuration.

http://www.microsoft.com/download/en/details.aspx?id=8089

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***

Windows 2008 R2 Radius configuration issue..

Did you find the requested guide??? (step by step configuration of the windows server 2008 and the wlc)

Hall of Fame Super Silver

Windows 2008 R2 Radius configuration issue..

How about this

http://araihan.wordpress.com/2010/04/30/complete-guide-to-build-a-cisco-wireless-infrastructure-using-cisco-wlc-5500-cisco-1142-ap-and-microsoft-radius-server/

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
Cisco Employee

Windows 2008 R2 Radius configuration issue..

Could you provide me the error from the NPS > event viewer? The error message would point us in the right direction.

Jatin Katyal


- Do rate helpful posts -

~BR Jatin Katyal **Do rate helpful posts**

Windows 2008 R2 Radius configuration issue..

I just added this last week.  I think there are some similar Docs out there on the internets, but this should take you top to bottom for an NPS install, including all prerequisites such as a CA, etc.

https://supportforums.cisco.com/docs/DOC-32752

As Jatin suggested, if you have any errors on NPS you can share, it could be helpful.

It would also be helpful to collect a client debug to "verify" whether we are communicating properly with the RADIUS server or just being "rejected".

From the WLC CLI, start the following for a test client.  Then connect and attempt to authenticate with the AD credentials.  Post the collect outptus back here.

>debug client

Cisco Employee

Windows 2008 R2 Radius configuration issue..

yep, that's how we can filter out the client specific debugs and see what exactly radius returning...

fyi, here is a path you need to look out for NPS error.

go to NPS > administrative tools > event viewer > Custom views > server roles > network policy and access-services.

Jatin Katyal

- Do rate helpful posts -

~BR Jatin Katyal **Do rate helpful posts**
New Member

Re:Windows 2008 R2 Radius configuration issue..

Hi i done similar in past are you still having the issue or is it fixed


Sent from Cisco Technical Support Android App

1705
Views
0
Helpful
9
Replies
CreatePlease to create content