Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

windows PEAP with MS-CHAPV2 and Novell edirectory ??

I have a wireless with Cisco aironet, ACS and user database is Novell edirectory. I found when I use windows PEAP with MSCHAPV2 the authentication failed, if use GTC it success.

I checked cisco site looks like Novell edirectory does not support windows PEAP with MS-CHAP authentication? is it right?

Is any solution for this? I would like to use windows wireless client with PEAP. otherwise i have to install third-part wireless client to support GTC.

Thanks.

4 REPLIES
Silver

Re: windows PEAP with MS-CHAPV2 and Novell edirectory ??

Novell diectory does not support windows PEAP with MS-CHAP authentication

New Member

Re: windows PEAP with MS-CHAPV2 and Novell edirectory ??

Hi,

Yes, thats correctly understood, the old way of handling this was to buy client software (former Oddyssey or Aegis) Today that software is Cisco Secure Services Client if you want EAP-GTC support. Otherwise the most viable solution today would be to use the Novell Client32 with 802.1x support through XP supplicant and then run "FreeRadius" for the connection to Novell. That is a special solution developed by Novell together with Free Radius. The Radius server in this case will "translate" between the LDAP database eDirectory and the supplicant running EAP-MSCHAPv2. Drawback is that the Novell Client32 with 802.1x support is still in beta a few more months.

Good luck,

Richard

New Member

Re: windows PEAP with MS-CHAPV2 and Novell edirectory ??

Hi,

Did you make it work with a Token server or may it work with user/password credentials?

New Member

Re: windows PEAP with MS-CHAPV2 and Novell edirectory ??

Is this still in beta and has anyone tested it with Novell SUSELinux yet?

852
Views
4
Helpful
4
Replies
CreatePlease login to create content