Is it possible to do both wired AND wireless Guest access on the same controller? The Design Guide I have read assumes you will only have 1 Guest lan per controller and thats the wired guest LAN. If thats the case why would you deploy a WLC for wired guest access only? My needs dictate that I have 1 wireless and 1 wired Guest access using web-auth redirect.
Re: Wired and Wirelss Guest access on the same WLC?
The "guest lan" is for the wired interface for wired users. Your wireless guest WLANs are not "guest lans".
So, create a wired interface for your guest LAN, which will be the ingress point for your wired clients. Then put it egress point the interface you would use for Wireless Guest users. Now you can have Wired and Wireless using the same "guest" interface to egress...
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...