Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Wireless AP H-Reap vlan mapping changes.

Our Wireless AP is AIR-CAP3502E-C-K9 with WLC 5500. The issue is that in H-REAP VLAN Mapping the VLAn ID suddenly changes and if I checl the logs I see no downtime on the AP. Please note that this happen to random AP's and sometimes all the AP's in certain office. Anyone can help me?

Everyone's tags (3)
2 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Purple

Wireless AP H-Reap vlan mapping changes.

HI Denz,

Which version of ios u r running on WLCs?

please check these:https://supportforums.cisco.com/thread/2058870

https://supportforums.cisco.com/thread/2164452

Regards

Dont forget to rate helpful posts.

VIP Purple

Re: Wireless AP H-Reap vlan mapping changes.

HI Denz,

You are hitting this bug:

https://tools.cisco.com/bugsearch/bug/CSCue75078

Upgrade to 7.3 or 7.4 version, be arware that your AP supports this version.

Please make sure all ur wlans hv the same index number on all the wlcs.. If possible.. This mostly happens when the ap joins the other wlc n that may HV the Alan index number not matching the other wlc..

Reagrds

Dont forget to rate helpful posts.

4 REPLIES
VIP Purple

Wireless AP H-Reap vlan mapping changes.

HI Denz,

Which version of ios u r running on WLCs?

please check these:https://supportforums.cisco.com/thread/2058870

https://supportforums.cisco.com/thread/2164452

Regards

Dont forget to rate helpful posts.

New Member

Wireless AP H-Reap vlan mapping changes.

Software Version: 7.0.116.0
New Member

Wireless AP H-Reap vlan mapping changes.

base on the bug report (https://tools.cisco.com/bugsearch/bug/CSCsw6899) the fixed knwo release include

7.0(116.0) but currently we are using it. Anyway this mean that we still need to upgrade to higher version.

VIP Purple

Re: Wireless AP H-Reap vlan mapping changes.

HI Denz,

You are hitting this bug:

https://tools.cisco.com/bugsearch/bug/CSCue75078

Upgrade to 7.3 or 7.4 version, be arware that your AP supports this version.

Please make sure all ur wlans hv the same index number on all the wlcs.. If possible.. This mostly happens when the ap joins the other wlc n that may HV the Alan index number not matching the other wlc..

Reagrds

Dont forget to rate helpful posts.

320
Views
0
Helpful
4
Replies
CreatePlease login to create content