Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Wireless interfaces Radio 0 and Radio 1

Hi,

Is it possible to turn on both the  radio interfaces Radio 0 and Radio 1.  (  Radio0-802.11N2.4GHzRadio1-802.11N5GHz ). For the SAME SSID. Access Point is 1250 series.  Do we need any extra hardware for this?

Please share the experience.

Any link on cisco.com?

Thanks in advance

Subodh

3 REPLIES
Gold

Re: Wireless interfaces Radio 0 and Radio 1

Sure.  I assume you're using an autonomous AP.  The SSID is created in global config mode with the dot11 ssid commands.  Then you apply the SSID to which radio interfaces you want with the interface command ssid XXXXX.

New Member

Re: Wireless interfaces Radio 0 and Radio 1

Hi,

Thanks for you reply. We are having autonomous AP.  What will be the effect of turning on both teh radio interfaces for same SSID any benefit ?

Thanks

Subodh

Hall of Fame Super Gold

Re: Wireless interfaces Radio 0 and Radio 1


Q:  What will be the effect of turning on both teh radio interfaces for same SSID?
A:  The SSID will be broadcasted on both radios AND you can enable 802.11n.

How will you be powering the AP?  Power injector or standard PoE (15.4 watts) or PoE+?

302
Views
5
Helpful
3
Replies