wireless security with zero client configuration

[ahmedfouad]

Dears,

i have a client that needs to have 802.1x based wireless security with zero configuration at his smart-phone devices , just needs to select the ssid prompt for authentication ,login by his domain account and that's it .

is it possible ?

[Scott Fella · Accepted solution]

Yes that is possible using 802.1x PEAP MSChapv2.  This uses AD credentials so when the user clicks on the ssid, they will be prompted to use their AD credentials.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

[Scott Fella]

You can find examples on the Internet depending on what Radius server your using.

Here are some:

http://www.labminutes.com/sec0095_acs_wireless_dot1x_peap_eap_tls_machine_authentication_2

http://networklessons.com/wireless/peap-and-eap-tls-on-server-2008-and-cisco-wlc/

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

[ahmedfouad]

thanks alot Scott , very helpful links

[Scott Fella]

No problem. Let use know if you run into any other issues or have questions.

Sent from Cisco Technical Support iPhone App