Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
You may experience some slow load times, errors, and slight inconsistencies. We ask for your patience as we finalize the launch. Thank you.

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Wireless Security

Hello all!!

I own a wireless lan on my hotel. Every thing is fine.I am sharing internet.I have done this by natting On linux.And then one cable goes to the access point. [Access point is not doing the nat linux is doing it..] I am assignning ip via DHCP that is 192.168.1.0./24 . Now the problem is that the guest's are peering to other guests computer.They some times delete other guests file also. So what do i do now.I just want them to use the internet only. Not peer on the other guests computer..Is there any any possibility i can do. .If cisco Access Point Can resolve this issue then there is no problem for me to replace it with the cisco ones, But it should be tri mode[A/B/G] Simultineously..

Thanking You...

  • Security and Network Management
2 REPLIES
New Member

Re: Wireless Security

You will want to add some firewall rules on your linux router to drop all traffic except for http. How to do this depends on your vers of linux. I suggest you check out some linux distros geared at being a router only. I used to use one called Clark Connect. It had a nice web based front end for management.

New Member

Re: Wireless Security

Look at PSPF

Publicly Secure Packet Forwarding (PSPF) prevents client devices associated to a bridge or access point from inadvertently sharing files with other client devices on the wireless network.

http://www.ciscotaccc.com/wireless/showcase?case=K16772337

113
Views
5
Helpful
2
Replies