Each Cisco WiSM is represented in the Cisco WCS as one module with two controllers. After the IT administrator enters the management IP address of the first Cisco WiSM controller, the Cisco WCS automatically finds the IP address of the second Cisco WiSM controller. The IT manager can replicate the configuration of the first Cisco WiSM controller on the second Cisco WiSM controller in a single step. The Cisco WCS displays the slot number, controller number, and IP address for each Cisco WiSM controller.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...